Washing Machine Repair Issues: How to Troubleshoot Before Calling a Repairman

Every homeowner understands the importance of a washing machine. They are also aware of the implications of a broken washing machine; it can be really disheartening. This means pileup of dirty clothes. You have to plan inconvenient trip to the Laundromat, not to mention the pickup and drop-off charges. If you’re experiencing this kind of situation, you should consider machine repair by an expert. However, there are some minor issues you can troubleshoot on your own before contacting an expert. The following washing machine issues fall under this category:

Washer Fails to Run:

When the washing machine fails to run, it can be due to some minor errors. The first thing to check is the power connection. You should ensure the machine is plugged and that the plug is not loose. To confirm the power supply to that outlet, plug in a different appliance. If the other appliance works, then the outlet is intact and this means the washing machine is broken. However, if the other appliance fails to work, then you have an electrical problem. You can either check your connections or call an electrician (not a washing machine repair expert).

Washer Fails to Fill or Drain:

This can be a pretty basic problem. When the washing machine comes on but does not fill with water, you should check the hose. The washing machine will not fill if the inlet hoses are clogged. Therefore, you must check the hoses for clog and clean it. If the washer fails to drain after a cycle, you should check the drainage hoses. When you are sure there is no obstruction, you can call in a technician. Much larger issues can be responsible. Such issues include pump, water level issues, drive belt and lid switch issues.

Leaky Washer:

Sometimes, a leaky washer can be the result of loose hose connections. This leak can occur during filling or draining. When a puddle is always discovered after running the machine, the hoses should be checked. Ensure that hose connections are secure and tight. If it is a front-loader, the door gasket should be checked for small tears. The source of the problem may not be observed when the machine is off. Upon observation during a cycle, the source of the leak can be detected. However, the problem could be a much serious one. This would require a washing machine repair expert. Bad connections, damaged hoses and torn door gaskets must be replaced.

Noisy Washer:

A noisy washer can be as a result of inadequate balance. Here you must check that the unit is level. Otherwise, a small piece of wood can be used to achieve balance. The wood is placed under one of the legs. The noise could also be due to heavy load. In such cases, you must reduce the load on the machine. Otherwise, a professional must be hired as the solution may be a new agitator.

Washing machine repair is necessary to prevent unnecessary complications. Troubleshooting implies knowing the source of the problem and taking steps to get it resolved.

 

Categories: Home

About Author